This complete kit gives you everything you need to transfer a photo onto a wooden block — a unique and personal craft that’s perfect as a keepsake or heartfelt gift. With easy-to-follow instructions and all the materials included, you’ll be able to transform a printed photo into a piece of art displayed on real wood. What’s Included in the Kit: 1 Smooth wood block 220-grit sandpaper Transfer medium Brush Sponge Craft stick Sealer and Finish – Gloss Step-by-Step Instructions: Step 1 – Prepare the Wood Surface Sand the wood block with the included sandpaper until smooth. Wipe away dust and debris. Step 2 – Print Your Photo Use a laser printer to print a 5x7 inch image on standard paper. Note: The image will transfer in reverse, so flip it digitally beforehand if needed (especially for text). Step 3 – Apply the Medium & Attach the Photo Use the brush to apply a thin, even layer of transfer medium to both the printed photo and the wood. Place the image face down on the block. Use the craft stick to remove bubbles and smooth the paper. Let dry for 24 hours. Step 4 – Reveal the Image Dampen the sponge slightly with water and gently rub off the paper to reveal the transferred image. Step 5 – Clean and Seal Let dry again. Remove leftover paper fibers gently. Once fully dry, apply a thin coat of gloss sealer for protection and shine. ✅ Tips for Best Results: Use only a small amount of water when revealing the image. Choose high-contrast, bright photos. Let the sealer dry fully before touching the block. ⚠️ Safety Instructions: This kit is not a toy. Adult supervision is recommended for children under 12. Do not ingest any materials in the kit. Keep out of reach of small children and pets. Work in a well-ventilated area when using the sealer and transfer medium. Avoid contact with eyes; rinse immediately with water if contact occurs.